Extreme Networks Summit WM Series Uživatelská příručka stáhnout pdf (Strana 31)

Summit WM-Series WLAN Switch and Altitude Access Point Software Version 1.0 User Guide

3 Summit WM-Series Switch Software

configuration

Configuration steps: overview

To set up and configure the Summit WM-Series Switch and Altitude APs, follow these steps:

1 First-time Setup: Perform “First-Time Setup” of the Summit WM-Series Switch on the physical

network to modify the Management Port IP address for the enterprise network.

2 Product Key: Apply a Product Key file, for licensing purposes.

3 Data Port Setup: Set up the Summit WM-Series Switch on the network by configuring the physical

data ports and their function as “host port”, “router port”, or “3rd party AP port”.

4 Routing Setup: For any port defined as a “router port”, configure static routes and OSPF parameters,

if appropriate to the network

5 Altitude AP Initial Setup: Connect the Altitude APs to the Summit WM-Series Switch. They will

automatically begin the “Discovery” of the Summit WM-Series Switch, based on factors that include:

● their Registration mode (in the Altitude AP Registration screen)

● the enterprise network services that will support the discovery process.

6 Altitude AP Configuration: Modify properties or settings of the Altitude AP, if desired.

7 WM Access Domain Services Setup: Set up one or more virtual subnetworks on the Summit WM-Series

Switch. For each WM-AD, configure the following:

● Topology: configure the WM-AD, and assign the Altitude APs radios to the WM-AD.

● Authentication and Accounting: configure the authentication method for the wireless device user

and enable the accounting method.

● RADIUS Policy: define Filter ID values for user groups

● Filtering: define filtering rules to control network access

● Multicast: define groups of IP addresses for multicast traffic

● Privacy: select and configure the wireless security method on the WM-AD.

Enabling the product key

Once the “First-Time Setup” is complete, the next step in the initial setup of the Summit WM-Series

Switch is to enter your product key. This is a one-time event. The Product Key file is provided with

your Summit WM-Series Switch in a downloaded file.

For assistance, if you cannot find the product key, contact your local representative. To find your nearest

service organization, access the Extreme Networks website at www.extremenetworks.com, and then

select your country’s Extreme website from the drop-down list. The service organizations for your

country will be listed on the local site. This product area is IP Convergence Solutions or Wireless.

If no Product Key is enabled, the Summit WM-Series Switch functions with all features enabled in

demonstration mode.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 227 228

Žádné komentáře

Extreme Networks Summit WM Series Uživatelská příručka Strana 31