Extreme Networks ExtremeWare XOS Command Specifikace stáhnout pdf (Strana 80)

100

101

80 ExtremeWare XOS 10.1 Command Reference Guide

Commands for Managing the Switch

configure snmpv3 add filter-profile

configure snmpv3 add filter-profile {hex} <profile_name> param {hex}

<param_name> {volatile}

Description

Associates a filter profile with a parameter name.

Syntax Description

Default

The default storage type is non-volatile.

Usage Guidelines

Use this command to add an entry to the snmpNotifyFilterProfileTable. This table associates a filter

profile with a parameter name. The parameter name is associated with target addresses, and the filter

profile is associated with a series of filters, so, in effect, you are associating a series of filters with a

target address.

Example

The following command associates the filter profile prof1 with the parameter name P1:

configure snmpv3 add filter-profile prof1 param P1

hex Specifies that the value to follow is to be supplied as a colon separated string

of hex octets.

profile_name Specifies the filter profile name.

param_name Specifies a parameter name to associate with the filter profile.

volatile Specifies volatile storage.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 757 758

Komentáře k této Příručce

Žádné komentáře

Extreme Networks ExtremeWare XOS Command Specifikace Strana 80

Komentáře k této Příručce