Extreme Networks ExtremeWare XOS Command Specifikace stáhnout pdf (Strana 376)

100

101

376 ExtremeWare XOS 10.1 Command Reference Guide

STP Commands

configure stpd forwarddelay

configure stpd <stpd_name> forwarddelay <seconds>

Description

Specifies the time (in seconds) that the ports in this STPD spend in the listening and learning states

when the switch is the Root Bridge.

Syntax Description

Default

15 seconds.

Usage Guidelines

After you have created the STPD with a unique name, the keyword stpd is optional.

You should not configure any STP parameters unless you have considerable knowledge and experience

with STP. The default STP parameters are adequate for most networks.

The range for the <seconds> parameter is 4 through 30 seconds.

Example

The following command sets the forward delay from STPD1 to 20 seconds:

configure stpd stpd1 forwarddelay 20

stpd_name Specifies an STPD name on the switch.

seconds Specifies the forward delay time in seconds. The range is 4 to 30 seconds.

1 2 ... 371 372 373 374 375 376 377 378 379 380 381 ... 757 758

Komentáře k této Příručce

Žádné komentáře

Extreme Networks ExtremeWare XOS Command Specifikace Strana 376

Komentáře k této Příručce