Extreme Networks Altitude 4700 Series Instalační příručka stáhnout pdf (Strana 39)

Altitude 4700 Series Access Point Installation Guide 39

NOTE

The AP4700 GE2 port will not be enabled unless a POE power source is used that supplies

802.3at power to the access point's GE1/POE port. Make sure an APPSBIAS1P3AFR model

Power Injector is used to ensure 30 WATTS of power is available to enable the WAN port. If a

legacy 802.3af power supply is utilized, the GE2 port will not be operational.

a Select the Enable WAN Interface checkbox to enable the WAN port. Disable this

option to effectively isolate the access point’s WAN connection. No connections

to a larger network or the Internet will be possible. MUs cannot communicate

beyond the configured subnets.

b Select the This Interface is a DHCP Client checkbox to enable DHCP for the access

point WAN connection. This is useful, if the connected network uses DHCP.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 67 68

Žádné komentáře

Extreme Networks Altitude 4700 Series Instalační příručka Strana 39