Extreme Networks Altitude 4600 Series Instalační příručka stáhnout pdf (Strana 10)

Introduction

Altitude 4600 Series Access Point Installation Guide

● One RJ-45 connector

● LED indicators

● Safety wire tie point

● Slots for wall mounting

● Clips for mounting on a suspended ceiling T-bar

● Lock port for Kensington® style Security Lock

An Altitude 4600 Series Access Point has one RJ-45 connector supporting an 10/100/

1000 Ethernet port and requires 802.3af-compliant power from an external source.

NOTE

When operating in a Gigabit Ethernet environment CAT-5e or CAT-6 cable is required for Gigabit

operation.

An Altitude 4600 Series Access Point comes in both single and dual radio versions both

supporting 802.11a/b/g/n.

An Altitude 4600 Series Access Point contains runtime firmware which enables the unit

to boot after either a power up or a watchdog reset. The runtime firmware on the access

point and the firmware downloaded from the controller can be updated via the

Ethernet interface from the controller.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 46 47

Žádné komentáře

Extreme Networks Altitude 4600 Series Instalační příručka Strana 10